Greatest reference in our business is our successful past
MAGNETIC SWITCHES
Working principle
A reed contact in a housing is actuated by a permanent magnet. This allows magnetic switches to be used as limit switches. For checking movement (motion sensors etc.) pairs of magnets with opposing magnetic poles are mounted onto a shaft (or some other moving or rotating component) so that they pass very close to a magnetic switch. If the contact is not triggered within a specified time interval, a state of standstill or under-speed will be recognised. Rotation speed and linear speed can be monitored using the same principle.
With a suitable arrangement of magnets on a rotating appliance, magnetic switches can be used to sense the direction of rotation.
Area of application
As a limit switch and for the sensing of continuous movement or the speed of movement on a wide variety of rotating and other machinery.
Temperature
-20 °C to 80 °C
Materials
Brass, stainless-steel, glass fibre reinforced polyamide, aluminium, polyethylene.
Output
Switched output or continuous analogue output through suitable measurement converters. For sensing the speeds of rotation in a range from 200 - 3000 rpm.
Fitting and Types
Right-angled or cylindrical switch housing; mounted using nuts, screws or pins and thus suited to a large number of applications.
More Info
Price
MAGNETIC SWITCHES
Working principle
A reed contact in a housing is actuated by a permanent magnet. This allows magnetic switches to be used as limit switches. For checking movement (motion sensors etc.) pairs of magnets with opposing magnetic poles are mounted onto a shaft (or some other moving or rotating component) so that they pass very close to a magnetic switch. If the contact is not triggered within a specified time interval, a state of standstill or under-speed will be recognised. Rotation speed and linear speed can be monitored using the same principle.
With a suitable arrangement of magnets on a rotating appliance, magnetic switches can be used to sense the direction of rotation.
Area of application
As a limit switch and for the sensing of continuous movement or the speed of movement on a wide variety of rotating and other machinery.
Temperature
-20 °C to 80 °C
Materials
Brass, stainless-steel, glass fibre reinforced polyamide, aluminium, polyethylene.
Output
Switched output or continuous analogue output through suitable measurement converters. For sensing the speeds of rotation in a range from 200 - 3000 rpm.
Fitting and Types
Right-angled or cylindrical switch housing; mounted using nuts, screws or pins and thus suited to a large number of applications.
More Info
Price
KSR-KUEBLER MARKASINA A?T ?R?N GRUPLARI
ABAOUT
ELECTRODES
FLOAT SWITCHES
FLOW SWITCHES
GLASS LEVEL GAUGES
Horizontal magnetic float switches
KSR contact protection relays
KSR GT
KSR Level Controller
KSR limit sensors
KSR Measurement converters
KSR PADDLE SWITCH LEVEL LIMIT SWITCHES FOR BULK
KSR Power Supply
LEVEL SENSORS
MAGNETIC LEVEL INDICATORS
MAGNETIC SWITCHES
TANITIM
UltraMeter level measurement
ULTRASOUND DEVICES